Current Category EL connectors and accessories

Soldering connections

Each piece of EL wire requires a connector welded so you can plug and play.  Check the description of your wire to see if it includes connection service.  If not, you will either need a DIY connector kit or you can have us solder a connection for you.  See our category Buy a connection.

Splitter Wires for multiple connections:

If you want to connect multiple wires to the same driver you will need to increase the number of ports using 'Splitter wires' (see below).  Multiplying the connections does not decrease the light output in any way. 

	Y Splitter Connect 2 segments of EL to your driver.  Ensure the total length of both segments is within the range of the driver.		Price:	QTY:

	Tri Splitter Connect 3 segments of EL to your driver.  Ensure the total length of all segments is within the range of the driver.		Price:	QTY:

	Quad split Connect 4 segments of EL to your driver.  Ensure the total length of all segments is within the range of the driver.		Price:	QTY:

	Connector Kit PICTURE COMING SOON You only need these parts if you are doing the connections yourself.  In many cases, connection work is a service already included in the per metre price.  This connector kit contains: 1 male black lock connector (to marry with the female on the inverter) with around 20cm black twin cable 22/24guage 1 shrink tube very fine for twin cable 1 shrink tube for final finish  Soldering instructions can be mailed on request.		Price:	QTY: