|
Current Category EL Inverters/Drivers
EL products must be powered by a driver specific to the length of wire or area of panel.
Please be careful with your selection. If your total EL length falls short of the parameters of the driver it may reduce the life or the wire or damage it beyond repair. If your EL length exceeds parameters it won't glow to optimal brightness, if at all.
Multiple connections can be made from the same driver unit - see 'splitter wires' under the category EL accessories.
If you are at all unsure about which driver you need or you cannot see it on our site please email us as we can customise.
All inverters emit a slight high pitched buzz due to the high frequency of the current.
WARNING:
Powering your Inverter without EL wire or EL panel attached will burn the inverter.
Running your EL devise on an inverter meant for a larger surface area or length will cause the EL device to overheat, followed by reduced function or complete failure.
|
Inverter for 12-15m EL with Sequencer (12V)
12 to 15 Metre Sequencer Inverter (12V)
This inverter repeat plays through a number of sequences, illuminating the EL wire at each connection point at different times.
You have the option of connecting up to 8 segments of wire to be part of the sequence.
For further detail, click on the DETAIL button.
|
|
Price:
|
|
|
Inverter sound Activated for 8-10m EL wire (12V)
This inverter will light up from 8-10m wire. It has a constant on setting and a sound sensitive setting with adjustable sensitivity. A great inverter to use near music source.
For more information click on the DETAIL button.
|
|
Price:
|
|
|
Inverter Sound Activated for 15-20M EL wire (12V)
This inverter will light up from 15-20m EL wire. It has a constant on setting and a sound sensitive setting with adjustable sensitivity. A great inverter to use near music source.
For more information click on the DETAIL button.
|
|
Price:
|
|
|
Inverter for 25-30m el wire (12V)
This 25-30m Inverter is made with a tough plastic, splash-proof casing, great for stage applications. It has one port to plug your EL wire into but you can increase the number of ports with splitter wires (see accessories category).
Input Voltage: 12VDC
Output Voltage: 95V-100VAC
Output Frequency 1000Hz-1100Hz
Function: Constant/Flash?Off
Optimum EL length to run from this inverter: 25-30M
Dimensions: 65mmx60mm35mm
|
|
Price:
|
|
Previous Page 1 [2]
Shopping cart software
and credit card processing provided by ezimerchant
Payment Methods
- Direct bank deposit
- Australian Cheque (please allow clearance time)
- Australia Post Money Order (please no international money order)
- Credit card via or Paymate
|
| 
